What is Air Conditioner Service? India
During air conditioner service, the professional cleans the dust particles and debris from the condenser coil and evaporator coil, and other fundamental components of the system. In a split air conditioner, the condenser coils are in the outdoor unit. Air filter and evaporator coil are in the indoor unit. AC Technician clean the drain and checks for leakage at various places with help of soap solution and foam. AC Service may be of following types such as Power Jet Service. Deep Clean Air conditioner service. Foam ac service and dry ac service. It depends upon customer choice that which kind of ac service client likes.
window air conditioner is a compact device. In this type air conditioner all the parts are assembled in one unit. Such as compressor, condenser coil, evaporator coil, blower, fan , motor, filter and control units etc. Window ac service is performing after removing from installed place. AC service may be one of the following services like deep clean ac service. Power jet ac service. Dry ac service. Foam air conditioner service
Steps Included in AC Service
During performing air conditioner service an ac technician should follow the following steps- for window ac
1- First of all check the ac connection for power supply
2- Now switch on the air conditioner and wait for compressor getting on
3- Check the cooling
4- Switch off the power supply and disconnect the ac wire from stabilizer on power point
5- Remove filter and grill from front of air conditioner and then remove air conditioner from fixed cover(cover mounted in the window) carefully
6- Now get the power jet pump ready and start deep clean ac service and remove all the dust and debris from air conditioner. Wash all the parts of air conditioner that can be washed. Clean the filter with water jet. Clean the grill with water properly.
7- After washing all the parts clean the water from the parts with the cloth and paper.
8- After deep cleaning reinstall the air conditioner at the same place and again checkup ac cooling.
Steps For Split Air Conditioner Service
When an ac technician performs ac service for split air conditioner. Technician should follow some important steps these steps are very compulsory for safety for both ac technician and customer as well as system also.
1- First of all visit outdoor unit and with help of pressure gauge and can top valve check for nitrogen, oxygen and refrigerant. AC Professional can ask the customer if another technician visited there before him.
2- Check all electrical connection and earthing
3- After it Switch on the air conditioner and wait for the compressor getting on. Checkup for cooling and pay attention for any type of error code
4- Now remove the needed parts from indoor and cover it the help of water proof service cover properly
5- Get the power jet pump ready and clean the indoor unit deeply with the help of water jet. One thing should be in mind that jet pressure shouldn’t be too much otherwise it can damage the fins.
6- After cleaning indoor unit properly visit the outdoor unit and clean it properly with the power jet pump.
7- Now reassemble all the removed parts at their respective place and wipe out the indoor unit properly with the help of tissue paper or clean cloth.
8- Reconnect all the connection and switch on the air conditioner again and checkup cooling
9- If in step 1 you found gas level low then according to the need refill the gas and the check the cooling
